Cycling is perhaps the most available game on earth. However, it can likewise be quite possibly the most brutal. From beginners testing themselves as far as possible in a playful way to experts competing in the hardest races on the planet. 


Regardless of whether you're new to cycling or a deep-rooted veteran with a great many kilometers in the legs, we as whole commit errors. It's how we learn, the “experiential learning cycle” so to speak. In this way, before you make any more of these basic cycling mistakes. Ideally, they'll help you out and may even improve you as a rider.


Saddle Height

Besides soft tires, saddle height is one of one primary reason you might be wasteful as a rider, as a seat put too high or too low implies that the force from the legs will not be conveyed as expected. As a guide for getting your seat tallness right, do the following:

  • Lower limb measure is commonly used to configure saddle height
1. Ischial tuberosity length
2. Trochanteric
3. Inseam Length

  • Ride alongside your heel on the pedal.
  • When your leg is at the very bottom of the pedal stroke your leg should be almost straight, however not exactly.
  • when riding with your foot in the ‘normal’ position (ball of the big toe over the center of the pedal axle) you should achieve an efficient pedaling action, at an ideal height.
  • One should in any case have the option to contact the ground with your toes on either side of the bicycle while sitting on the seat.

Not Fueling For A Ride Correctly

For runners, the commonly used expression 'hitting the wall' refers to the moment that the body runs out of fuel/energy and comes to a standstill. Cyclists refer to this event as the 'bonk' and it is something that will have happened to most riders sooner or later, even the aces. When taking off on a ride, take a touch more food than you need and maybe two bottles, particularly if riding in more remote areas where there's little possibility of discovering someplace to get supplies. Plan as having some food/drink available for later is superior to risking bonking.


Braking In Corners

This is a typical cycling mistake, particularly among new cyclists. The most secure, most efficient technique is to slow down before the corner. Not really slowing down as you are on the corner, as doing this with your bicycle banked over at a point can bring about the bicycle locking up and you losing control and crashing.

“The most secure, most productive procedure is to slow down before the corner, not slowing down as you are on the corner.”

To brake safely you should do it on the approach to the corner, making sure you brake gently, but enough to slow you to the point where you can safely negotiate the corner. Remember to break earlier in wet conditions as the stopping distance will be greater, especially for those of you with the caliper as opposed to disc brakes.


No Spares Or Tools

When taking off on a ride you need to guarantee that you've pressed a couple of fundamental spares and tools that could get you home without any issue. As a guide I generally carry the following things that can be reserved in a saddlebag under your seat or distributed in your pockets:

  • 2 x inner tubes
  • Tire levers
  • Patches (instant stick-on type are best)
  • Mini Pump
  • Multi-tool (ideally with chain link extractor)


Grabbing Hard On The Brakes

When needing to slow down don’t just ‘grab’ the brakes hard. Braking should be done in a controlled manner so the weight distribution of you on the bike remains as stable as possible. The dangers of sudden braking include loss of control and stability and in some cases can result in you going flying over the handlebars. To ensure safe braking you should look well ahead, anticipate and brake steadily using both front and rear simultaneously, with slightly more emphasis on the front brake.


Riding Too Far, Too Hard, Too Soon

When needing to slow down don’t just ‘grab’ the brakes hard. Braking should be done in a controlled manner so the weight distribution of you on the bike remains as stable as possible. The dangers of sudden braking include loss of control and stability and in some cases can result in you going flying over the handlebars. To ensure safe braking you should look well ahead, anticipate and brake steadily using both front and rear simultaneously, with slightly more emphasis on the front brake.


Poor Bike Maintenance

Again, this is essential data yet of significance both from a comfort perspective and from a security point of view. Start routinely checking your bicycle and keeping it kept up, particularly if you don't need the shame of being saved from the side of the road. Give specific consideration to the brakes, gears, handlebars, and tires, and regularly clean and lubricate the chain.  It makes sense to get your bike serviced at regular intervals, especially if you are unsure or in doubt regarding a more complex part of the bike. The best advice is not to change it.


Unsuitable Clothing

This is one more component of cycling that you need to anticipate, else you could find yourself miserable on a ride or even worse, in extreme difficulty. Ensure you look at the climate gauge for the whole length of your ride. Consider the length of the ride you are arranging and check whether the climate conditions are probably going to be variable.

”In colder conditions, it’s best to slightly overdress than underdress.”

In colder conditions, it's ideal to be overdressed than underdressed as you can generally take off layers if you are excessively warm or unfasten to give cool air access. On the other hand, if taking off in shorts and short sleeves and run over a rainstorm, for instance, your internal heat level can fall quickly, so consistently pack a windproof/waterproof layer as well as a gilet that can be stowed into your pocket. This turns out to be considerably more significant if you are riding in the sloping territory with an uncommon height change where you could be extremely warm on the climb, however freezing on the decline due to windchill.


Not Using Gears Efficiently

Gears help improve the efficiency of your power over different terrain, so ensure you use them effectively. The majority of bikes will have upwards of 20 gears, giving a very wide choice of ratios to suit all abilities. It may take a while to discover what gearing works for you but for sure you shouldn't pedal so angrily that your body begins to shake from one side to another while doing 16 mph(kilometer per hour) on a flat stretch of street. At the other end of the spectrum, you shouldn't be attempting to turn over large gear so that each pedal insurgency resembles completing a load meeting and your knees begin to hurt. 

As a guide, it is recommended that on a flat road you should maintain a rhythm of 70-90 rpm (revolutions per minute). Ensure you change down to the simpler gears for climbs and change up to the harder gears for the compliment downhill areas of the street. This may seem like essential stuff yet trust me, it's more normal than you understand if the measure of individuals I see struggling in the wrong gear.


Squeaking Chain

Not exclusively can a squeaking chain be intriguing to you and your kindred riders, however, it likewise will not be doing good for your bicycle chain or cogs (gear-teeth on the back center) either, as the sound is friction-wearing out your components. Thus, fly on some light oil or chain lube, (there’s a wide variety available for wet and dry riding) clear off the abundance, and away you go! No more squeaks and your chain (and different parts) will be ever thankful and will last much more than they, in any case, may have done.

Explore the Cycling range
Related tags :